Location: Home > Knowledge > LED Drivers & Control System
LED Drivers & Control System




DANSON offers a range of custom made LED drivers to optimize the performance of the LED systems.

The current/voltage characteristic of an LED is similar to the diodes.

Current through a diode varies exponentially with the applied voltage; an increase in applied voltage will cause  more current to flow in the diode.
 If the applied maximum rated voltage exceeds by a small amount, a larger current will flow through LED chip and  potentially will destroy the LED chip.

To overcome this issue , DANSON always uses flicker free constant current drivers designed according to the chip specs ,this will ensure the stable operation of chips and will avoid any hotspots. The followings are the key features of DANSON custom made drivers.
 ● Isolated AC/DC off-line LED drivers
 ● Power factor > 0.95
 ● Total harmonic distortion (THD) < 10%
 ● Under 5% 100Hz/120Hz output current ripple
 ● Tight led current requlation +_ 5%
 ● Under 0.5s start-up time
 ● LED open circuit protection
 ● Over-current protection
 ● LED short circuit protection
 ● Input over-voltage and brown-out protection
 ● Dimming Options :  Triac dimmable ( leading , trailing and Universal ), 0-10V interface for dimming control, DALI , Zigbee.

NOTE: If you're interested in our content, please follow us on.
Contact Us

Danson Electronics Ltd.

Add: 37/24 Garling Road, KingsPark, NSW 2148, Australia

Mobile:+61 437 866 307

Tel:+61 (0)298635838

Fax:+61 (0)280886240

E-mail: technical@dansonelectronics.com

Web: https://www.dansonelectronics.com

Copyright © Danson Electronics Ltd. All Rights Reserved.   Sitemap   XML